X-Ray Inspection

Subscribe to Thread

Greetings, Can you recommend an X-Ray inspection system a... - Mar 02, 2010 by Sparky

For a earlier, similar thread posted by an old friend Cal Dr... - Mar 02, 2010 by davef

> Greetings, > > Can you recommend an X-Ray &g... - Mar 04, 2010 by SMT Process Engineer

Have you checked out YESTech X-Ray systems? Their 2D X-r... - Mar 23, 2010 by OEI Dave

Sparky

#61283

X-Ray Inspection | 2 March, 2010

Greetings,

Can you recommend an X-Ray inspection system and recommend which ones to stay away from.

Our use is for inspection of BGAs after re-work and repair - very low volume.

Thanks Sparky_

reply »

davef

#61284

X-Ray Inspection | 2 March, 2010

For a earlier, similar thread posted by an old friend Cal Driscoll ...

Classes of BGA inspection machines * GO/No-go Machine specs: 50Kv, limited zoom, perpendicular head, board size. * Low to mid range machine:+75Kv, Angular inspection,zoom,image capture, board size. * Mid to High machine: +90Kv, Rotating/angular inspection ,zoom, image capture, image processor sw, pass through capable, board size.

reply »

SMT Process Engineer

#61295

X-Ray Inspection | 4 March, 2010

> Greetings, > > Can you recommend an X-Ray > inspection system and recommend which ones to > stay away from. > > Our use is for inspection of > BGAs after re-work and repair - very low > volume. > > Thanks Sparky_

We have glenbrook x-ray inspection system . Basic Model u try out other model

reply »

OEI Dave

#61442

X-Ray Inspection | 23 March, 2010

Have you checked out YESTech X-Ray systems?

Their 2D X-ray systems to fit your requirements and they are usually at a very reasonable price point for what you get.

Good Luck

reply »