Email This Page to a Friend
Date:
November 02, 2009 07:04 PM
Author:
Manuel
Subject: Glue on 0402 components
Hi there, I'm looking for some info on how to glue 0402 components... I wonder if you can share some info, I think is pretty hard and I want to know your experiences.
thanks!
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60270)
Date:
November 03, 2009 10:56 AM
Author:
Manuel
Subject: Glue on 0402 components
0402 will be glued on a fuji GL
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60281)
Date:
November 03, 2009 04:28 PM
Author:
davef
Subject: Glue on 0402 components
We have never dispensed adhesive for 0402, but here's your rules of thumb:
* Nozzle diameter should be half the desired glue dot diameter.
* Minimum of 0.010" gap between the adhesive and pad, both sides.
We'd guess that you should be using a 0.3mm nozzle
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60284)
Date:
November 24, 2009 11:55 PM
Author:
Heny
Subject: Glue on 0402 components
You can order the glue stencil at http://www.usastencils.com
They can design the opening of the apertures on the stencil in the middle of the caps so you can screen an adhesives through the opening then you will have it right on the center of the caps.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60555)
