Email This Page to a Friend
Date:
October 13, 2009 08:09 AM
Author:
kudamarani08
Subject: High-end SPI and AOI?
Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target.
Here's the PCB dimension
length(x) = 399.92mm
width(y) = 141.626mm
Thanks all!
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60099)
Date:
October 13, 2009 04:11 PM
Author:
MikeS
Subject: High-end SPI and AOI?
Not sure how many inspections need to be done at 15 - 20sec total per board, but you may need to install multiple SPIs/AOIs to hit your takt time.
Mike
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60105)
Date:
October 13, 2009 08:13 PM
Author:
kudamarani08
Subject: High-end SPI and AOI?
Hi Mike,
it must be 100% machine inspection.
Thank you.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60107)
Date:
October 13, 2009 10:56 PM
Author:
C.P Company
Subject: High-end SPI and AOI?
> Can anyone help me recommend or simulate a SPI
> and AOI machine that can balance our FUJI NXT 1
> with 14 modules. We are using MPM accela printer.
> 200 UPH is our target.
>
> Here's the PCB
> dimension
>
> length(x) = 399.92mm width(y) =
> 141.626mm
>
> Thanks all!
If you need an inline SPI and an inline AOI later on,
please contact us.
We have currently Cyberoptics SE300 and KS-Flex 12M.
Thank you very much.
Sincerely Yours
Casey Park
C.P Company
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60108)
Date:
October 14, 2009 08:39 AM
Author:
edmaya33
Subject: High-end SPI and AOI?
Anybody here work with Viscom S3088-II QS SPI?
I heard this machine offers an ultra high speed of inspection and a state of the art features.
We have been working with Orbotech P36+ but all we got is headache. A 2K US$ illumination board always fail after a 24/7 operation. Plus the fact that the SPI family of Orbotech ceased its development.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60110)
