Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
High-end SPI and AOI?

High-end SPI and AOI?

Subscribe to Thread

Can anyone help me recommend or simulate a SPI and AOI machi... - Oct 13, 2009 by kudamarani08

Not sure how many inspections need to be done at 15 - 20sec ... - Oct 13, 2009 by MikeS

Hi Mike, it must be 100% machine inspection. Thank yo... - Oct 13, 2009 by kudamarani08

> Can anyone help me recommend or simulate a SPI > a... - Oct 13, 2009 by Starworks Korea

Anybody here work with Viscom S3088-II QS SPI? I heard this... - Oct 14, 2009 by edmaya33

Hi, Orbotech actually sold it's division to ORPRO Vision.... - Jan 12, 2010 by chupito

We have a Viscom SPI S3054QS. Yup, the machine offers a quit... - Jan 12, 2010 by graceyt

I heard some of the manpower of KY transfer to VI technologi... - Jan 20, 2010 by edmaya33

Hi, As stated above development of the systems we took ov... - Jan 25, 2010 by Orpro Vision GmbH: Adam Shaw

Hi, Thank you for posting your question. Omron Electroni... - Jan 26, 2010 by OEI Dave

kudamarani08

#60099

High-end SPI and AOI? | 13 October, 2009

Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target.

Here's the PCB dimension

length(x) = 399.92mm width(y) = 141.626mm

Thanks all!

reply »

MikeS

#60105

High-end SPI and AOI? | 13 October, 2009

Not sure how many inspections need to be done at 15 - 20sec total per board, but you may need to install multiple SPIs/AOIs to hit your takt time.

Mike

reply »

kudamarani08

#60107

High-end SPI and AOI? | 13 October, 2009

Hi Mike,

it must be 100% machine inspection.

Thank you.

reply »

Starworks Korea

#60108

High-end SPI and AOI? | 13 October, 2009

> Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = > 141.626mm > > Thanks all!

If you need an inline SPI and an inline AOI later on, please contact us.

We have currently Cyberoptics SE300 and KS-Flex 12M.

Thank you very much.

Sincerely Yours

Casey Park C.P Company

reply »

edmaya33

#60110

High-end SPI and AOI? | 14 October, 2009

Anybody here work with Viscom S3088-II QS SPI? I heard this machine offers an ultra high speed of inspection and a state of the art features.

We have been working with Orbotech P36+ but all we got is headache. A 2K US$ illumination board always fail after a 24/7 operation. Plus the fact that the SPI family of Orbotech ceased its development.

reply »

chupito

#60822

High-end SPI and AOI? | 12 January, 2010

Hi,

Orbotech actually sold it's division to ORPRO Vision. They development of the equipment is still progressing in both their Reflow inspection and SPI systems. Both have newer versions of software released and at the show in SanDiego they demonstrated a new benchtop solution.

Development has not ceased.

reply »

graceyt

#60824

High-end SPI and AOI? | 12 January, 2010

We have a Viscom SPI S3054QS. Yup, the machine offers a quite good speed. My board dimension is 150 by 250mm. The cycle time is only about 24 sec. The analyze time is only about 10sec. You can make your loading faster, if that's what you needed. I have no experience with Orbotech. But there's one more good machine for SPI, it's Koh Young. Korean made. It is a 3D SPI, but of higher price than Viscom. Hope this will help.

reply »

edmaya33

#60879

High-end SPI and AOI? | 20 January, 2010

I heard some of the manpower of KY transfer to VI technologies to introduce a new technology, same manner as of KY had. This french owned company post an impressive Inspection machine ( Both AOI and SPI ).

Going back to ORBOTECH P36+, is there any bug fixes with the illumination board? If Yes, how can we contact you.

reply »

Orpro Vision GmbH: Adam Shaw

#60908

High-end SPI and AOI? | 25 January, 2010

Hi,

As stated above development of the systems we took over from Orbotech has not ceased.

I don't know which geographic region you are in, but your first contact should be either a Business Partner, or ORPRO Vision support direct in the region.

On http://www.orprovision.com under "About Us" you can find details of our Support offices, and Business Partners.

Otherwise, just let me know where you are, and I can send the relevant contact details.

Best Regards

Adam Shaw

reply »

OEI Dave

#60932

High-end SPI and AOI? | 26 January, 2010

Hi, Thank you for posting your question.

Omron Electronics provides both High End AOI and 3D SPI systems. I believe that our S7oo series AOi and VP 5000 or VP 6000 3D SPI systems will meet your needs. Please feel free to contact me via email (david.upton@omron.com) for more information or, depending on your location, to set up time to meet so that I can better discuss your project.

reply »