Email This Page to a Friend
Date:
October 09, 2009 06:07 AM
Author:
Fönsi
Subject: Convert .PAF in Standart Pick and Place Files
Hello
I'm searching for a Programm, that can convert .PAF-Files (Pick & Place Panasonic ASCII file format) to the Standart Pick and Place Format.
Do someone of you have something?
Thank you
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60076)
Date:
October 20, 2009 09:41 AM
Author:
A Very Frazzled Man
Subject: Convert .PAF in Standart Pick and Place Files
Standard Pick and Place Format? Is there such a thing? No really...I'm asking...is there?
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60141)
Date:
October 21, 2009 09:58 AM
Author:
Fönsi
Subject: Convert .PAF in Standart Pick and Place Files
Ok,I agree, you're right. I also noticed at the last few days, there is no standart format for it. What I'm searching is a programm, that can convert different files (for example a paf-file) into a textfile with Ref, Xpos, Ypos, deg and top/bottom.
For the few next weeks I could solve this problem with creating an output filter for the customer, which works with my Essemtec Placers.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60153)
Date:
November 01, 2009 11:35 PM
Author:
Vinit
Subject: Convert .PAF in Standart Pick and Place Files
Hi Fonsi,
If you can send a sample of the .PAF file, I can help you out by converting it to a generic text file which you can use to program any machine. If you can also send a sample of the format that your Essemtec uses, I can try to convert the .PAF file to the Essemtec format.
Since this forum is not a sales forum, let me clarify that the help will be free of any charges. You can send me the samples to vinit.verma@prosemtechnology.com
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60255)
