Email This Page to a Friend
Date:
October 07, 2009 07:47 AM
Author:
Nagesh
Subject: AOI - Whether Vi Tech or Omron
Dear ALL,
Which machine is the best cost effective in the Pre-Reflow stage.(Programming lead time/Inspection capabilities)
Whether it is AOI from Omron or ViTech.
Thx in advance for all your sincere postings.
Cheers,
Nagesh
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60058)
Date:
October 07, 2009 04:09 PM
Author:
Reese
Subject: AOI - Whether Vi Tech or Omron
Do a search for both of these vendors on this forum and you may find what you need.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60064)
Date:
October 12, 2009 01:09 PM
Author:
Pitbull
Subject: AOI - Whether Vi Tech or Omron
Nagesh,
I haven't worked with an Omron machine, so I can't comment on that. We use VI and are extremely satisfied with their performance.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60093)
Date:
October 14, 2009 09:05 AM
Author:
Jason Duerr
Subject: AOI - Whether Vi Tech or Omron
Mirtec and Yestec are the only games in town.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60113)
Date:
October 15, 2009 04:11 PM
Author:
R.Powers
Subject: AOI - Whether Vi Tech or Omron
We've been using Vi machines for 6 years now and love them. For us they have been quick to program, good at optimizing, and excellent at low false fail rates. The vision tools also gave us more accurate component data. We had problems with high false fails rates with Omron, although that was a couple years ago. Omron themselves said they couldn't do any better. I don't know if their current product is any better.
Rob
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60121)
Date:
October 23, 2009 12:15 AM
Author:
Tony_D
Subject: AOI - Whether Vi Tech or Omron
Hello Nagesh,
Do yourself a favor, check out MIRTEC's MV-7 system. I purchased one of these machines with the Intelli-Scan laser option. This is a secondary laser inspection system that allows you to test for coplanarity of leaded and non-leaded devices using laser height measurement. In my opinion this is the best investment that I have ever made.
Good Luck...
Tony_D
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60160)
Date:
October 23, 2009 12:41 PM
Author:
Stephen
Subject: AOI - Whether Vi Tech or Omron
I used Mirtec's 5 years ago.
At this place we have Vi-techs.
I can see why the people who recommend Vi-techs do so.
They are good machines.
However overall I would recommend the Mirtechs.
They were faster and easier to program.
And they were were a lot better at identifying wrong parts, not just part absence/presence.
And it sounds like they are better than when I used them, which is not suprising. They didn't wait for me to give feedback, they actively sought it and acted on it.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60169)
Date:
November 05, 2009 12:22 AM
Author:
Shinsei Technology
Subject: AOI - Whether Vi Tech or Omron
Hi... Do you have consider other brand excluding these Omron and Vi Tech??
We have try the Omron before but not so effectiveness.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=60321)
