Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Solder paste height capability

Views: 7593

#59448

Solder paste height capability | 4 August, 2009

I would like to perform a Solder paste height capability study. I will apreciate any info about and what equipment use to measure the height of the solder paste. I only found the attached equipment. Solder Paste Height Measurement System (SPM-300-3D) with 3D inspection http://www.caltexsci.com/solder_paste_measurement.htm

Thanks,

reply »

#59449

Solder paste height capability | 4 August, 2009

This was posted previously here on SMTnet: Here is an alphabetical list of what I ve seen as the top vendors (I work for one of these vendors) ** Agilent ** Cyberoptics ** GSM ** Koh Young ** Orbotech

Google => solder paste inspection SMTnet => search the fine Archives

reply »

#59457

Solder paste height capability | 4 August, 2009

Is this topic on Wikipedia, Facebook, or MySpace as well?

reply »

#59479

Solder paste height capability | 6 August, 2009

Don't forget about ASC International. Having the largest supported installed base of benchtop SPI systems in the world, I'm surprised we were missed.

If you have any further questions, I woudl be happy to assist. We have performed hundreds of tests and I would be happy to share the information.

Thank you.

Steve Arneson

reply »

Manufacturing Software

Jade Series Selective Soldering Machines