Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Panasert RH6 Problem

Views: 3020

#59291

Panasert RH6 Problem | 15 July, 2009

Just curious if anyone here has experience with a Panasert RH6 Radial Insertion machine. Ours is having some problems detecting insertion, appears to be failing to sense when the legs are cut and is triggering the error.

reply »

#59393

Panasert RH6 Problem | 27 July, 2009

This is the common problem for RH6 m/c.You need to check of the following: 1)Make sure the spiral corl is secure properly especially near to detection amplifier box 2)you may try to fine tuning the sensibility VR on the detection card. 3)change the transistor strain gauge

reply »

#59394

Panasert RH6 Problem | 27 July, 2009

> Just curious if anyone here has experience with a > Panasert RH6 Radial Insertion machine. Ours is > having some problems detecting insertion, appears > to be failing to sense when the legs are cut and > is triggering the error.

This is the common problem for RH6 m/c.You need to check of the following: 1)Make sure the spiral corl is secure properly especially near to detection amplifier box 2)you may try to fine tuning the sensibility VR on the detection card. 3)change the transistor strain gauge

reply »

ICT Total SMT line Provider

SMT fluid dispensing