sri repairs pad repairs

Subscribe to Thread

Has anyone used a hot press to bond new pads to the boards i... - May 19, 2009 by Bryan

We use epoxy to repair damaged pads ... - May 19, 2009 by davef

We use an epoxy method at the moment but the cure times are ... - May 28, 2009 by Bryan

Bryan

#58840

sri repairs pad repairs | 19 May, 2009

Has anyone used a hot press to bond new pads to the boards if they have been lifted?

we have one and have tried and carried out some DOE's on FR4 boards but when trying the same settings on Polyamide they basically fell of can anyone give any pointers?

reply »

davef

#58853

sri repairs pad repairs | 19 May, 2009

We use epoxy to repair damaged pads

reply »

Bryan

#58920

sri repairs pad repairs | 28 May, 2009

We use an epoxy method at the moment but the cure times are long with 4 hours oven cure and 4 hours air cure before solder can be applied to the pad

the hot press bonds the already made epoxy pad to the board in less than 5 min and is ready to solder straight away

reply »

SMTnet
»
Electronics Forum
»
sri repairs pad repairs

Training online, at your facility, or at one of our worldwide training centers"

IPC Certification Training from the comfort of your home or office. See our 2024 Training schedule now.

High Throughput Reflow Oven

Now Online

81
Visitors

232
Members

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fixate labor costs with selective soldering solutions