Flexa Prog query

Subscribe to Thread

Hi all, I have a proto build of 3 cards - the 3 cards are... - Feb 18, 2009 by aj

Hi aj, I've never done Flexa programing, but in MCS2 I ma... - Feb 18, 2009 by jdengler

thanks Jerry, thats the only way I could think of doing i... - Feb 18, 2009 by aj

I think as long as they are imported as different board numb... - Feb 19, 2009 by MikeS

you can copy board at the panelize option and put the value ... - Mar 04, 2009 by kircchoffs

AJ, you are making this harder than it realy is. Import the... - Mar 17, 2009 by Gregf912

#58135

Flexa Prog query | 18 February, 2009

Hi all,

I have a proto build of 3 cards - the 3 cards are being supplied on the same panel.

what is the best way to program this on Fuji Flexa - each card will have a lot of the same references e.g C1 , C2 etc...

aj...

reply »

jdengler

#58138

Flexa Prog query | 18 February, 2009

Hi aj,

I've never done Flexa programing, but in MCS2 I made it 1C1 for C1 on board 1 and 2C1 for C1 on board 2 etc. I did this in a spread sheet for each board then copy and paste each data set into 1 spreadsheet then saved as text and imported into MCS2.

May not be the best way but it is a way.

Jerry

reply »

#58141

Flexa Prog query | 18 February, 2009

thanks Jerry,

thats the only way I could think of doing it aswell.

alan...

reply »

MikeS

#58148

Flexa Prog query | 19 February, 2009

I think as long as they are imported as different board numbers, you can have "duplicate" ref designators.

reply »

kircchoffs

#58259

Flexa Prog query | 4 March, 2009

you can copy board at the panelize option and put the value of width of the first board at y of the second board.

use panel fiducial at the mark coordinates

reply »

Gregf912

#58377

Flexa Prog query | 17 March, 2009

AJ, you are making this harder than it realy is. Import the cad file with the BOM. Then use the panalize function built into Flexa to step and repeat for block 2 and 3. The ref. designators will be tied to each block (board).

reply »