Dek-265 no power

Subscribe to Thread

DEK_265LT had been turn off and on by itsefl couple of tim... - Apr 30, 2008 by GEM

Is the green box on top of the transformer? If so you can b... - Apr 30, 2008 by Real Chunks

Yes, it is. there's a heat sensor under of 4 resister,look... - Apr 30, 2008 by GEM

I've done it in the past. By-pass it and you'll be back in ... - Apr 30, 2008 by Real Chunks

You need switch out the cognex vision card. ... - Apr 30, 2008 by Paul Richardson

No, you don't. ... - Apr 30, 2008 by Real Chunks

It back running now, after shut it off over night, it power... - Apr 30, 2008 by GEM

GEM

#54525

Dek-265 no power | 30 April, 2008

DEK_265LT had been turn off and on by itsefl couple of time yesterday,and then off for good. I check the power going in to machine to the switch,got power to it,then power out to that little green box but there wasn't any power out put from that little green box. look like there wasn't any power going in to the transformer. any idea ??????? thanks

reply »

Real Chunks

#54527

Dek-265 no power | 30 April, 2008

Is the green box on top of the transformer? If so you can by-pass it.

reply »

GEM

#54528

Dek-265 no power | 30 April, 2008

Yes, it is. there's a heat sensor under of 4 resister,look like it open now.I'm thinking to make a jumper right there to see it can power up the machine.(this's a little green box on top of the transformer)

reply »

Real Chunks

#54530

Dek-265 no power | 30 April, 2008

I've done it in the past. By-pass it and you'll be back in production. Make sure your power is off.

reply »

Paul Richardson

#54532

Dek-265 no power | 30 April, 2008

You need switch out the cognex vision card.

reply »

Real Chunks

#54535

Dek-265 no power | 30 April, 2008

No, you don't.

reply »

GEM

#54536

Dek-265 no power | 30 April, 2008

It back running now, after shut it off over night, it power back up,look like the heat sensor under of 4 resistors is start getting bad.But i'll by pass it, if it happen again. Thank you for your in put.

reply »