Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
.030

.030

Subscribe to Thread

Does anyone know of any stencil houses in the U.S. that offe... - Oct 17, 2007 by Sr. Tech

.030 Inch? Are you sure? I seriously doubt .030" stainless... - Oct 17, 2007 by jmelson

Yup... I do indeed need a .030" foil. It is for a special ad... - Oct 18, 2007 by Sr. Tech

Good afternoon, What application? I might help since have... - Oct 18, 2007 by Hypnotia

We are printing adhesive where a through hole DIP goes. I t... - Oct 18, 2007 by Sr. Tech

I just looked in my MSC Industrial catalog and they have coi... - Oct 19, 2007 by FredC

Stentech offers 0.030" foils as well. I had them quote some... - Oct 23, 2007 by cuculi54986@yahoo.com

Sr. Tech

#52099

.030 | 17 October, 2007

Does anyone know of any stencil houses in the U.S. that offer .030" staineless foils ?

Thanks

reply »

jmelson

#52103

.030 | 17 October, 2007

.030 Inch? Are you sure? I seriously doubt .030" stainless foil can be etched with any usable result. Do you mean .003" or .030 mm (pretty thin).

I've been using .005" brass shim stock, but I am going to .003" now, but I know there are companies that make stainless shim stock, also.

Jon

reply »

Sr. Tech

#52115

.030 | 18 October, 2007

Yup... I do indeed need a .030" foil. It is for a special adhesive printing application.

And FYI I did find stencil houses that will do .030 foils.

Thnx

reply »

Hypnotia

#52117

.030 | 18 October, 2007

Good afternoon,

What application? I might help since have some experience and knowledge in adhesive printing.

BR, Pavel

reply »

Sr. Tech

#52118

.030 | 18 October, 2007

We are printing adhesive where a through hole DIP goes. I think we have it under control. We too have quite a bit of experience when it comes to printing adhesive

Thank you for the offer..

reply »

FredC

#52122

.030 | 19 October, 2007

I just looked in my MSC Industrial catalog and they have coils of shim stock which would be a hard temper in .031 thickness on Pg.1770. Also stainless sheets of cold drawn material .03 thick on page 1791.

reply »

cuculi54986@yahoo.com

#52152

.030 | 23 October, 2007

Stentech offers 0.030" foils as well. I had them quote some custom fixtures laser cut from 0.030" foil.

reply »