RV/D axis counting error. (S20)

Subscribe to Thread

I have problem with RV/D axis counting error. I have tried s... - Jul 26, 2006 by

Seth, have you tried the zero point on the star? ... - Jul 27, 2006 by John Smith

Yes, I have but if I don't then I won't be able to reference... - Jul 27, 2006 by

Do the sleeves spin freely in the segment? Could also be tha... - Jul 30, 2006 by John Smith

What is the distance from the reader to the segment, and can... - Jul 31, 2006 by

My problem solved. I had to re-adjusted the reader, ... - Aug 01, 2006 by

Good Job!! ... - Aug 02, 2006 by John Smith

seth

#42970

RV/D axis counting error. (S20) | 26 July, 2006

I have problem with RV/D axis counting error. I have tried several things, but it just doesn't help. These are the things I had tried 1. Check all 12 segment for dirty. 2. Check DP motor for proper operation. 3. Replaced reader. In order for me to perform RV/D head calibration I have to clear this error out or else it won't let me.

reply »

John Smith

#42985

RV/D axis counting error. (S20) | 27 July, 2006

Seth, have you tried the zero point on the star?

reply »

seth

#43011

RV/D axis counting error. (S20) | 27 July, 2006

Yes, I have but if I don't then I won't be able to reference run.

reply »

John Smith