Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Snap rivet

Views: 1703

#41298

Snap rivet | 2 May, 2006

Hi,

I have a problem on removing the rivet after fitting to the PCB hole as the hole becomes loose. My questions are:

1) How to fix the loosen PCB hole? 2) What is the good practice to remove the rivet without damage the PCB hole?

Your help is much appreciated.

Regards,

reply »

Manufacturing Software

Reflow Oven