You must be a registered SMTnet user and logged in to post a reply or ask a question. If you are coming from a partner site such as the SMTA or Solder.net, you'll need to complete free registration to post. Registration is Free and only takes a minute. Click Here to register now.

Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Active threads from last 30 days :

Register Free!

SMT Production						Start a new thread
		Check box next to thread to receive posts via email
						messages | views
		Voiding in LGA (LT) soldering	SMT-manufacturer		09/02/10	13	586
		Solderability - Gold Pad Cleaning	KevM		09/02/10	4	223
		GSM-1 CEP Camera	eezday		09/02/10	6	200
		PWC Problem on GSM-1	eezday		09/02/10	1	84
		Fiducial Recognition	Tanderson		09/02/10	13	1860
		Feeder Calibration	namruht		09/02/10	5	659
		Machine capabilities	namruht		09/02/10	10	3185
		SUNSDA Board loader	Mike Mc		09/01/10	2	90
		Printing Speeds for Fine Pitch	leeg		09/01/10	4	293
		11 BGA's 12-Layer nightmare	horvath83		09/01/10	6	1066
		HS60 component camera	seth		09/01/10	1	59
		Tombstoneing LEDs	Doug Johnson		09/01/10	5	471
		Solder bridging on IC leads	John		09/01/10	6	1186
		waterman wave soldering 7lines vs.5 lines	nir		09/01/10	1	65
		Batch cleaner	jrr3434		09/01/10	4	632
		LINEAR LGA DC/DC low yield	Eyal		08/31/10	2	430
		aluminium tape for profiling	dan_ems		08/31/10	2	365
		radio frequency in OSP surface finishing	nir		08/31/10	1	55
		SPEA 4040 installation and training	cardinal		08/31/10	1	58
		Copper Oxide Thickness Measurement on PCBs	James		08/30/10	3	367
		ERP/MRP questions...	ifrydr		08/30/10	2	132
		Multiple Resistor Rework	Stephen R		08/30/10	7	503
		YV100xg error	Naveed Ahmad		08/29/10	2	1059
		kemet Ceramic Capacitor	Jacki		08/29/10	2	710
		More Toyota recalls, but this time due to solderjoint crack	Patrick Bruneel		08/27/10	1	256
		New forum for UK Versatronics & other low-end P&P machine users	whitewing		08/27/10	1	177
		Fuji CP43 air consumption	smteng		08/26/10	2	489
		Peel Back Force	FD		08/25/10	5	1022
		Solder Paste Type for QFN Printing	SteveO		08/25/10	2	201
		hollow jet wave	ozgurv		08/25/10	1	140
		cold solder at flexible pcb	Aidi Azmi		08/24/10	2	1015
		SMD Push fit connectors	aj		08/24/10	2	506
		Pressing in Holtite Sockets?	John		08/24/10	2	232
		looking for cp6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm	SMTmax		08/24/10	1	86
		Black Barrel - Wave solder defects	RuggedSMT		08/24/10	1	248
		Solder Mask Alignment	Tenny		08/24/10	2	439
		super fine pitch paste & dispensing questions	rl		08/23/10	5	753
		Request For Catalouge or Datasheet	Shirkavand		08/22/10	2	1096
		Plasma Cleaning / Etching	John		08/21/10	1	534
		how much equipment need for setup a TV Factory ?	rezai_k2005		08/21/10	2	621
		Solder Balls-No Clean Paste	namruht		08/21/10	16	2041
		Venezuelan company looking to assemble a PCB Factory	Ed.Duque		08/20/10	1	443
		Where to recycle scrap from board depanelization?	Darryl S.		08/20/10	4	374
		Omron AOI	namruht		08/20/10	1	140
		HELP! Need MCH file to CSM84V-III and CSM66-III	Arkadiusz		08/20/10	3	248
		FIRST PASS YIELD vs DPMO?	jamyboy		08/19/10	1	146
		Storage Life of Completed Assemblies	tpearson		08/19/10	2	383
		Manncorp 2000 Pro SMD Counter	Carol Stirling		08/19/10	1	139
		Functional Test Development	ssager		08/18/10	4	1246
		BTU Pyramax software password	PFI		08/18/10	3	372
		X-Ray for CM	Mike_at_Agility		08/18/10	1	121
		How many repairs for SMT component ?	quest@fr		08/17/10	4	700
		Need help about Contact 3AVX machine	haiae		08/17/10	9	1739
		Landrex AOI	jdm2008		08/16/10	2	731
		AOI SI-V200 PCB/PWB	dan_ems		08/14/10	4	3017
		Solderability Issues	Craig		08/13/10	12	3491
		PCB trouble shooting	1036		08/12/10	4	1320
		metal core/clad pcb	Julie		08/12/10	3	461
		Automatic Board Support Systems	A Very Frazzled Man		08/10/10	3	1328
		Boar warpage after wave soldering	Jacki		08/10/10	2	404
		FRAUDULANT COMPANY	SME		08/10/10	1	392
		Solder paste high measurement	Domingo Lebron		08/10/10	4	571
		PVA conformal coating machine	raghu		08/10/10	1	267
		Looking for SMT Consultant in Bay Area	SDIbuyer		08/09/10	3	1348
		LGA processing	scotceltic		08/09/10	2	682
		MPM UP2000 Squeegee Problem	dman97		08/06/10	5	2771
		Ersa Hotflow 5 Help!	cusackmusic		08/06/10	4	1361
		X-Ray machines general questions	floydf		08/05/10	2	396
		Which benchtop reflow oven for lead free?	PeteB		08/05/10	1	284
		Corrosion associated with degreaers	DL		08/05/10	2	440
		Flex Circuits - Bend proximity spec	muarty		08/04/10	3	1122
		Plating Into Solution	fredm		08/04/10	1	220
		nozzle level (low) out of tolerance window	keiths487		08/04/10	9	1075
SMT Design						Start a new thread
		Check box next to thread to receive posts via email
						messages | views
		Microvias	Tenny		08/18/10	1	418
		vertically mounted PTH components	Mbulelo		08/11/10	2	645
SMT Future Issues						Start a new thread
		Check box next to thread to receive posts via email
						messages | views
		PVA conformal coating machine	raghu		08/09/10	1	239
SMTnet Site Support						Start a new thread
		Check box next to thread to receive posts via email
						messages | views
		Samsung CP20-CV Help	martingruber		08/17/10	5	242
		conformal coating	raghu		08/07/10	1	162

Want to find an answer? Search the forum now.

Search: