This Onboard Forum is brought to you by:

You must be a registered SMTnet user and logged in to post a reply or ask a question. If you are coming from a partner site such as the SMTA or Solder.net, you'll need to complete free registration to post. Registration is Free and only takes a minute. Click Here to register now.

Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

OnBoard Forum   Who's OnBoard? Bob Willis Discussion was held from July 20, 2000 12:00 PM to July 20, 2000 12:00 PM ET Bob Willis operates Electronic Presentation Services, a training and consultancy business based in England and operating world wide. He worked with the GEC Technical Directorate as Surface Mount Coordinator for both the Marconi and GEC group of companies and prior to that he was Senior Process Control Engineer with Marconi Communication Systems. Topic Pin In Hole Reflow, his new process of Simultaneous Double Sided Reflow Assembly, Lead-Free Solder, or any process related subject.

Active threads from OnBoard Forum with Bob Willis :

Register Free!

OnBoard Forum with Bob Willis						Start a new thread
		Check box next to thread to receive posts via email
						messages | views
		What is the rootcause for BGA Lifted after reflow	MCR		05/20/08	1	245
		Cleaning Misprinted PCB's	mbourke		07/21/00	2
		Lead free	newf		07/21/00	8
		orange peel effect on solder joints	Frank		07/20/00	3
		US implementation	C_Herder		07/20/00	5
		Flex Circuit	JACKIE O'ROARK		07/20/00	1
		Trimmer placement.	Ketan Bhatt		07/20/00	3
		Simutaneous Double sided reflow assy	lkoens1		07/20/00	2
		Rework Or Not To Rework Thant's The ...	davef		07/20/00	2
		Lead-Free Formulation Selection	davef		07/20/00	4
		Industry Challenges	Mike McMonagle		07/20/00	4
		Compliance	C_Herder		07/20/00	2
		Wave solder	C_Herder		07/20/00	2
		SDRSS	Mike McMonagle		07/20/00	4
		Flip Chip and lead-free soldering	grantb86		07/20/00	2
		Lead free alloys	William		07/20/00	2
		Resistor Paks on solder side of board	Tekguy2000		07/20/00	6
		Paste Push-Out In PP Assembly	davef		07/20/00	4
		EU WEEE Directive Adoption	Mike McMonagle		07/20/00	4
		PIHR	Jeanette		07/20/00	2
		0402 Components and Solder Paste	Mike McMonagle		07/20/00	2
		Stencil Printing	RossC		07/20/00	2
		PIHR	Jeanette		07/20/00	2
		PIHR	Jeanette		07/20/00	2
		Conductive adhesives vs. Lead-free solders.	Deon Nungaray		07/20/00	2
		Who Was Charles Hutchins?	davef		07/20/00	2
		Conductive adhesives vs. Lead-free solders.	Deon Nungaray		07/20/00	1
		PIHR	Jeanette		07/20/00	2
		Lead-Free Processing	davef		07/20/00	2
		lead free no-clean printing paste	qsheng		07/20/00	2
		European - relaxed attitude	leadlegs		07/20/00	2
		Removing RFI / RF Shields	davef		07/20/00	2

Want to find an answer? Search the forum now.

Search: