Forum: SMT Production & Design
Thread: CP6 Maintenance
Date: March 29, 2006 08:14 AM
Author: Sr.Tech
Subject: CP6 Maintenance
Dax, You need to clean out those clutches. Even if they seem OK they can still get varnished up and cause minute alignment problems.
I think I mentioned before that you can get in there with a Q-tip, but the true way to get them perfect is to take them apart.
Unless you have been trained on how to do this, I reccomend that you do not attempt it. It can be tricky, and you can drop stuff behind the turret crown if you are not careful.
(http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=40706)