Figured out that you have to press Ctrl & Enter to get this screen to come up.
Also, to remove the LCS, you need to remove the "Y" cable to the left of the control box in the bottom of the Topaz X.
All works well now, but still can't get it to load more than 4 parts on the heads at a time. There are 8 parts in a row, 4 for the TCN nozzles, and 4 for the 74 fixed nozzles. They are all in order in the mount file. It will pick up the 4 for the TCN nozzles, scan them, place them, then come back for the 4 parts on the fixed nozzles, scan them, and place them. We can't make it load all 8 nozzles, scan them, and place them. Is it a limitation of the vision system?