CME Technology Co., Ltd. Products

SMT Products and Services offered by CME Technology Co., Ltd.

SMTnet
»
SMT / PCB Products and Services
»
CME Technology Co., Ltd.
»
CME Technology Co., Ltd. Products

CME Technology Co., Ltd. is located in Xianyang, Shaanxi National High-tech Industrial Development Zone, is specializing in manufacturing equipment for mechanical testing and simulation, environmental reliability testing. »»

Headquarters: Xianyang, Shaanxi, China

Manufacturer

23 listed by CME Technology Co., Ltd.

Product	Category
KRD102 Clamping Force Tester KRD102 series clamping force tester is suitable for research, development, quality control and manufacturing of electronics, electromechanical, optoelectronic, automotive, toy, packaging and other industries. It can simulate the situation that the goods in the container are clamped when they are ...	Test Equipment
KRD101 Packaging Compression Tester KRD101 series packaging compression tester is designed to evaluate the compressive strength of packaging in order to prevent the product from deforming or being damaged during handling, stacking, storage, and transportation due to insufficient packaging strength. This machine is one of the main t...	Test Equipment
KRD100 Incline Impact Tester KRD100 series incline impact tester simulates the ability of product packaging to resist shock damage in the actual environment, such as handling, stacking of shelves, sliding of motors, loading and unloading of locomotives, product transportation, etc. This machine can also be used as common tes...	Test Equipment
KRD70 Hydraulic Vibration Shaker KRD70 series hydraulic vibration shaker converts the energy of high-pressure liquid into the power of the reciprocating motion of the cylinder through the electro-hydraulic servo valve. Especially suitable for vibration tests requiring low frequency and high force. It can realize sine, random, mu...	Test Equipment
KRD61 6-DOF Simulation Table KRD61 series 6-DOF simulation table is a closed-loop servo simulation platform consisting of six servo actuators and six sets of dedicated hinges connected at the top and bottom platforms respectively. By virtue of the telescopic movement of the six actuators, the upper platform moves in six degr...	Test Equipment
KRD60 3-DOF Test System KRD60 series 3-DOF test system simulates various mechanical, electrical, and electronic products installed on ships, seaplanes, and other equipment to perform sway and tilt tests to determine the ability and structural integrity of the product to withstand severe sway and tilt requirements. The t...	Test Equipment
KRD51 Transportation Bounce Test System Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must be transported off-road. All of th...	Test Equipment
KRD50 Transportation Simulation Test System KRD50 series transportation simulation test system is to simulate the actual road conditions such as shocks and vibrations during the transportation of various items of a specific load, and to evaluate the effect of the actual working conditions on the loading, unloading, transportation, packagin...	Test Equipment
KRD42 Double Lift Zero-distance Drop Test System KRD42 series double lift zero drop tester is mainly suitable for large size packaging products to resist drop impact performance, its powerful power system and unique sample support for easy loading and unloading of oversized, overweight items, and automatically rise to the set height, complete t...	Test Equipment
KRD41 Small Drop Test System KRD41 series small drop tester is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on, applicable standards JISC 0044 and IEC 60068-2-32. Through standard tests on electronic products (sur...	Test Equipment
KRD40 Zero Distance Drop Test Machine KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight items and automatically rise to the setting. After the height, the...	Test Equipment
KRD32 Non-standard Constant Acceleration Tester KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual-environmental force constant acceleration motion and central high-speed rotating motion, so as to assess the anti-load performance of electronic com...	Test Equipment
KRD31 Constant Acceleration Tester (Arm Type) KRD31 series constant acceleration tester is used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7. It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptab...	Test Equipment
KRD30 Constant Acceleration Tester (Box Type) KRD30 series box-type constant acceleration testing machine is used to determine that electronic components, small components and other electrical and electronic products are subjected to the force generated by the steady-state acceleration (constant acceleration) environment, such as running veh...	Test Equipment
KRD15 Pneumatic Horizontal Shock Response Spectrum Test System KRD15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy to provide impact energy, push the shock hammer to impact the resonance plate, and generate high energy shock. Comparing to traditional pendulum shock response spectrum tester, this machine has t...	Test Equipment
KRD14 Pneumatic Vertical Shock Response Spectrum Test System KRD14 series shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total resul...	Test Equipment
KRD20 Pneumatic Bump Test Machine The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working. Fully pneumatic driven, clea...	Test Equipment
KRD17 Pneumatic Bidirectional Vertical Shock Test System KRD17 series pneumatic bidirectional vertical shock test system is the novel designed and developed for large specimens that cannot or are not easy to turn over, especially adopt for battery testing. It can complete vertical upward and downward shock test in one test stand without moving the UUT....	Test Equipment
KRD16 High Impact Shock Test System High impact shock test system meets MIL-S-901D standard which covers shock testing requirements for ship board machinery, equipment, systems, and structures, excluding submarine pressure hull penetrations. The purpose of these requirements is to verify the ability of shipboard installations to wi...	Test Equipment
KRD13 High Energy Shock Test System KRD13 series high energy shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily imple...	Test Equipment
KRD12 Pneumatic Horizontal Shock Test System KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak saw...	Test Equipment
KRD11 Pneumatic Vertical Shock Test System KRD11 series pneumatic vertical shock test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of the products. The system meets...	Test Equipment
KRD10 Hydraulic Vertical Shock Test System KRD10 series full-automatic hydraulic shock test system is used to measure and determine the impact resistance of products or packaging, and to evaluate the reliability and structural integrity of products in a shock environment. The system can perform conventional half-sine wave, post-peak sawto...	Test Equipment

Product

KRD102 Clamping Force Tester

KRD102 series clamping force tester is suitable for research, development, quality control and manufacturing of electronics, electromechanical, optoelectronic, automotive, toy, packaging and other industries. It can simulate the situation that the goods in the container are clamped when they are ...