PCB Linking Conveyor For SMT | SZTech-SMT

PCB Linking Conveyor For SMT | SZTech-SMT Description:

PCB Linking Conveyor from SZTech SMT can be customized in multiple lengths, widths, and heights. The PCB linking conveyors we producing are all have the below configurations：

• High-quality step motor.
• Omron sensor.
• Customizable height, length, and width.
• Able to add lighting, fans, cleaner, etc.
• Have an integrated metal body or aluminum.

Main specifications

How many types of PCB link conveyors for SMT and MI production:

Standard SMT PCB link conveyor:
In general, the standard PCB link conveyor is mostly used for transmission and buffering. It adopts a wear-resistant and anti-static flat belt, which is suitable for most production needs. Its advantage is that the price is relatively low and the transmission is relatively stable; The only disadvantage is that because the product is transported by the belt, it is not suitable for the transportation of high-temperature products.
Dual-rail PCB link conveyor for dual-lane SMT:
The dual-rail PCB link conveyor is usually not needed, only some specific machines will be used, and its main function is similar to the standard PCB link conveyor.
SMT PCB chain link conveyor.
The chain-type PCB link conveyor is conveyed by a chain, and its advantage is high-temperature resistance, which is suitable for use under high-temperature conditions: such as wave soldering conveyor, reflow soldering conveyor, hot air curing furnace, UV furnace, etc. Its price is relatively more expensive than a standard PCB link conveyor.
Check the SMT PCB linking conveyor.
The inspection PCB link conveyor is based on the standard PCB link conveyor with a light group added to increase the intensity of light, which is conducive to the inspection and inspection of inspectors. It is usually used for inspection and manual insertion.

How to use SMT PCB link conveyor?

1. Start the distribution box button.
2. Regulate the speed and transmission width of the PCB link conveyor.
3. Turn on the power switch above (select manual or automatic button) a. When automatic operation is selected, the circuit board will directly enter the next process through the connection of the SMEMA signal. b. When the manual button is selected, the circuit board will stop above the sensor in the middle, and the inspector needs to inspect it. After the inspection is OK, click the jog button to transport the PCB to the next process.
4. Turn off the power switch and the switch of the distribution box when not in use.