Quad Meridian 1010

Subscribe to Thread

I'm trying to get an old Quad Meridan 1010 to run. The machi... - Feb 09, 2024 by Jeff_GAC

The width motor gets power from an amplifier SPA2100S. I wou... - Feb 12, 2024 by bobpan

Jeff_GAC

#90557

Quad Meridian 1010 | 9 February, 2024

I'm trying to get an old Quad Meridan 1010 to run. The machine has been sitting idle for several years. The conveyor won't home. If I press the servo on button the conveyor moves about 1/2 inch then stops. Conveyor status in Production Monitor shows Ready with Servo Off and Interlock On. Where is the interlock that it is referring to? What else could I check?

reply »

bobpan

#90559

Quad Meridian 1010 | 12 February, 2024

The width motor gets power from an amplifier SPA2100S. I would check the amplifier. It also has the encoder plug into MT1 card at enc3 input.

reply »