Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Philips Orion showing a L049 motor error.

Views: 2125

#74540

Philips Orion showing a L049 motor error. | 11 September, 2015

Our Philips Orion shows a L049 motor error immediately after we turn it on. Note that the Y axis servomotor was very hot prior to the last shutdown. Is this a problem with the motor or one of the boards?

reply »

#74545

Philips Orion showing a L049 motor error. | 11 September, 2015

Simon, Normally that error is caused by a bad motor but also there is a possibility that a driver board or even the servo board are defective and last but not least check all your cables and connections. finally let me mention that you can also receive technical support by sending your queries to the following email address APMRTechnical@kns.com

reply »

#74546

Philips Orion showing a L049 motor error. | 11 September, 2015

Thanks Armando. What is the easiest way to check if the motor is bad?

reply »

Jade Series Selective Soldering Machines

ICT Total SMT line Provider