Any Feedback on Panasonic CM202

Subscribe to Thread

Hi recently i happen to acquire a Panasonic CM202DH. Anyone ... - Aug 18, 2012 by bwjm

I've had a CM202DHU since new (10 years) and it is a very re... - Aug 21, 2012 by headlad

I would recommend you purchase a nozzle from Count On Toolin... - Aug 22, 2012 by tombstonesmt

Have you got some modern software to load the unit. My pr... - Sep 18, 2012 by sarason

handling CM202 all type and capable to mount 0201 component ... - Sep 18, 2012 by Arturo O. Obja-an

bwjm

#67045

Any Feedback on Panasonic CM202 | 18 August, 2012

Hi recently i happen to acquire a Panasonic CM202DH. Anyone has operate it before? Any comments or advises for me if i would need it to run HMLV with about 1 changeover per day. Is it able to mount 0201 inch components?

thanks in advance

reply »

headlad

#67061

Any Feedback on Panasonic CM202 | 21 August, 2012

I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mis-pick alarms.

reply »

tombstonesmt

#67074

Any Feedback on Panasonic CM202 | 22 August, 2012

I would recommend you purchase a nozzle from Count On Tooling if you plan on placing 0201's. It is possible but as mentioned there will problems with provided nozzles from Panasonic. Again, as mentioned, you have to teach the pick up position everytime the program is reloaded to the machine when placing 0201's. If you do this you'll be very pleased with the machine.

reply »

sarason

#67286

Any Feedback on Panasonic CM202 | 18 September, 2012

Have you got some modern software to load the unit.

My program PCB Synergy can do some of the Panasonic formats but not this one. It takes less than a day to write if you have some files for me to reverse engineer and the file you read it from.

Anyway my page PCB Synergy

http://members.iinet.net.au/~sarason/

regards Sarason

reply »

Arturo O. Obja-an

#67293

Any Feedback on Panasonic CM202 | 18 September, 2012

handling CM202 all type and capable to mount 0201 component with using nozzle type 205...

reply »